Mode: constant light mode, sensing mode.
There is a button switch on the front, when the button is pressed, there is a red light to be in the constant light mode, and then the red light is off to the induction mode.
In the sensing mode: when the person is within the sensing distance, the light source light strip will light up, and when the person leaves the sensing distance, the light strip will automatically turn off after a delay of 20 seconds.
In the face, there are only one switch for day and night. When you choose daytime, you can sense the human body during the day and night.
When you choose nighttime, you can only sense the human body at night or in the dark. If you keep sensing the distance, the light will not be Destroyed.
Dimming mode: There will be a push switch on the sensor box, which is divided into three sections of dimming, and the switch can hold the brightness that you want.
Sensing Distance: 2 m – 5 m
Time-Delay:15sec-5min (adjustable)
Light Control: 2 modes.
Mode 1: Day and Night
Mode 2: Night
Working Modes: “ON” and “PIR”
When you press Button, Red light turn ON, LED strip will always keep light ON, When you press button again, red light will be OFF, it will be “PIR” mode.
Motion Sensor Control Box ( DON’T Included AAA Battery)
